Quote:
Originally Posted by
liafelix (Post 89616)
Dear friends !
I need some technical helps !!!!
Can i use an pair of 2006 R1/R6 wheels on 2009 XT660R ?? If negative can i use a pair of MT03 or similar wheels ??
Waiting comments
Leandro
Sao Paulo - Brazil
|
Anything is possible with the right approach, I say the 06 R1/R6 rims would be to wide for the XT's swinging arm.
I would look at something like a SV wheels or simular wheel width.
You would need to remove your XT wheel & measure the center wheel/rim line to the center sprocket line, this is the most important measurement in finding the right rear mag wheel, the sprocket would need to modified to fit the new wheel. Then you would need to measure the outer wheel bearing to outer sprocket housing bearing distance between the wheels, spacers can be made to adjust the distance between the swinging arm & bearings. Setting the rim center line is critical.
The front is like wise the same as the rear, one needs to make sure the brake disc & rim center in are with in a few mm the brake caliper will adjust the brake disc center line if it is out by a few mm, the 320mm front brake disc would need to be modified to fit the new whell. Then space the rim to the center line of the bike with new machined spacers.
There you go, the theory side of the mod.:typing[1]:
|