.: XT660.com - The #1 XT660 Resource :.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Service & Maintenance ( https://www.xt660.com/forumdisplay.php?f=208)
-   -   DNA Filters - Stage 3 project continued... ( https://www.xt660.com/showthread.php?t=9703)

contrarian 26-03-09 21:13
Quote:
Originally Posted by Kev (Post 87354)
Where are you going to fit the battery & all the other electrical items that are bolted to both sides of the airbox?:paranoid:
DNA complete kit should solve everything :)

DNA 26-03-09 21:59
Quote:
Originally Posted by Kev (Post 87297)
I was not thinking of removing the air box, but rather gutting the inside & removing the top off it & placing a pod filter inside the air box.

I was looking at the Raptor set up something like this. http://cgi.ebay.com/ebaymotors/700-R...Q5fAccessories

Hi Kev,
DNA also offers a similar ATV kit and I checked it today, unfortunately it is impossible to fit inside the XTX/R air box; again the only possible solution is the complete air box design.
In two weeks time a dealer will bring over at DNA a XTX 660 modified 700 with Akra exhaust, PC3, DNA stage 1 & 2, it will be the platform for us to develop the complete Stage 3 DNA air box.
I think we have to start a new topic at the XT 660 X section to continue this project, as we are at the XT 66O Z section.

Please advise.

Regards
Dino

Kev 26-03-09 22:39
I look forward to your results.

As I mentioned there are a few of us running bored out throttle bodies, Marcel recently had his XTR on the dyno with a bored out throttle +2mm it gave a 3.4hp gain, so we know this motor loves air flow.

http://www.xt660.com/showpost.php?p=86673&postcount=35

Steve_athens 26-03-09 22:59
Im also in for a stage 3 kit for sure when you release it!after my high lift cam which had very good results my next mods will be +2mm TB and the stage 3 air filter/kit.I hope with these 2 mods i will get very close to 60hp on the wheel without touching the head and piston

DNA 26-03-09 23:02
DNA STAGE 3 complete air box MOD
 
Kev,
I know,
DNA has started already studying the project, it is thought so many things have to be relocated, but we will give it a try.

As the project develops I will post the progress and keep all informed.
As soon as we will have the first 2 working prototypes I will send you one over for you to play with, OK?

One more explanation concerning the stages:
� DNA Stage 1 - this is a replacement filter that will fit the air box without any modification, No fueling adjustment is necessary.
� DNA Stage 2 � this is a �bolt on� modification of the existing stock air box, Fueling adjustment is necessary in most cases.
� DNA Stage 3 � this is a complete new air box modification that will replace the existing stock air box. Major fueling reprogramming is necessary.

I will also post flow data as we test.

Regards
Dino

DNA 26-03-09 23:09
Suporting DNA Filters
 
Quote:
Originally Posted by Steve_athens (Post 87468)
Im also in for a stage 3 kit for sure when you release it!after my high lift cam which had very good results my next mods will be +2mm TB and the stage 3 air filter/kit.I hope with these 2 mods i will get very close to 60hp on the wheel without touching the head and piston
Hi Steve,
Send me your contact details, if you are in Athens, maybe we will need to call you in for some testing.
If you are interested to help.
Regards,
Dino

Steve_athens 27-03-09 01:50
Of course im interested to help!pm sent with info


All times are GMT +1. The time now is 01:48.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.