.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Engine & Gearbox ( https://www.xt660.com/forumdisplay.php?f=206)
-   -   Stroker Crank ( https://www.xt660.com/showthread.php?t=9202)

schoemrich 17-02-09 11:56

The length of the con rod centre to centre is 135mm.

Kev 17-02-09 12:23

Thanks mate.

Ferg 06-11-18 18:12

Kev

Do you have a copy of the measurements still?
Also what is the maximum size of stroker crank to give 13.5:1 compression?
I guess the limiting factor is the piston skirt length.

The 660z is running fine at the mo with the new tight crankshaft key; but when it does go, would definitely look at a stroker big bore crank and piston. As well as changing out bearings and inspecting / replacing gears.


Many thanks

Fergus

Kev 12-11-18 10:38

Sorry I don't, we used 5mm stroker & you make any compression you want you just got to calculate the CR. Over 12.5:1 you cant use pump gas you need race fuel. https://www.ebay.com.au/itm/Raptor-7...04kD:rk:2:pf:0


All times are GMT +1. The time now is 13:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.