.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Affordable auxillary lights... ( https://www.xt660.com/showthread.php?t=9061)

Peatbog 26-01-09 14:10

Affordable auxillary lights...
 
There's been a few people mention additional lights, mostly the Hella units that TT peddle or the PIAA units, both appear very good but pricey all the same. Round where i live theres plenty of very dark roads so i've been thinking of adding some more light for a while. I've been considering these so i thought i'd mention them and see what you folks think.

http://www.flickr.com/photos/16046994@N06/3227822727/
http://www.flickr.com/photos/16046994@N06/3228678024/

they are a 70mm driving lamp ('e' approved for those of us in Europe), and they fit just nice in this space on the front on the Ten'.

http://www.flickr.com/photos/1604699...n/photostream/
http://www.flickr.com/photos/1604699...n/photostream/

they're not mounted yet - i was holding them from above for both those pics

bulbs are 55w halogens so total power consumption for the pair is 9.2A. they weigh a measly 156g each.

dimensions here. http://www.flickr.com/photos/1604699...n/photostream/

i have them on the front of another vehicle (fitted as main beam) and they are quite impressive considering their size-and pretty watertight too (with the addition of two cable ties per lamp i have submerged them with no water ingress) they cost around �40 a pair (i think). for the bike i plan to sort some brackets that will pick up on the lower mounting tab for the headlamp.

I think they're a canny little lamp which will fit nicely. What do you reckon? any good?

Gas_Up_Lets_Go 26-01-09 14:48

I've got one of those on my TTR, I bought them because they were very cheap (�15ish from Halfrauds). They are OK, actually they are fantastic given the crap (non halogen) bulb on the TTR.

I've been working on a bracket over the weekend, but there's very little to mount to in the front, once you've looked at the forks (when turning), and the dive of the bike. I'd like to get a look at the TT mounts and see where they mount to - pics anyone ??

NickW909 26-01-09 19:10

They look good to me and locating them in that 'gap' (assuming the fork movement is not restricted) it might help stop the turbulent air that pushes up through the gap around the forks?



Nick

NickW909 26-01-09 19:15

Quote:

Originally Posted by Gas_Up_Lets_Go (Post 80832)
I've got one of those on my TTR, I bought them because they were very cheap (�15ish from Halfrauds). They are OK, actually they are fantastic given the crap (non halogen) bulb on the TTR.

I've been working on a bracket over the weekend, but there's very little to mount to in the front, once you've looked at the forks (when turning), and the dive of the bike. I'd like to get a look at the TT mounts and see where they mount to - pics anyone ??


Looks like they mount to the frame that the headlight unit is mounted to:

http://www.touratech.com/shops/008/i...255-0_I_01.JPG

Peatbog 26-01-09 19:43

Quote:

Originally Posted by Gas_Up_Lets_Go (Post 80832)
I've got one of those on my TTR, I bought them because they were very cheap (�15ish from Halfrauds).

well i'll be damned - as you say, halfords. On their web for �26. i've been searching all over to find them cheaper and there they are in different packaging for �20 less.... we have an account with Ring at work too. b*gger.

GULG - as you've tried them on a bike do you think they're worth fitting to the ten?
i'm thinking of wiring them independantly of high beam so i can leave the dip beam on and have all areas lit up.

Peatbog 26-01-09 19:46

Nick - i'd wondered about the air too, we'll see.

Gas_Up_Lets_Go 27-01-09 08:20

Quote:

Originally Posted by NickW909 (Post 80853)
They look good to me and locating them in that 'gap' (assuming the fork movement is not restricted) it might help stop the turbulent air that pushes up through the gap around the forks?

I've got a sheet of perspex, I thought about cutting out a piece to fit in the gap, but again the mounting is a problem, unless it's fitted to the fork clamp, but then it's too low. It would stop the water from funneling up through the gap though when you hit a deeaper puddle!!



Quote:

Originally Posted by Peatbog (Post 80859)
GULG - as you've tried them on a bike do you think they're worth fitting to the ten?
i'm thinking of wiring them independantly of high beam so i can leave the dip beam on and have all areas lit up.

There is only 1 on the TTR, it makes a huge difference - but nowhere near as good as the Hella Micro DE's.

http://www.smokingtailpipes.com/Gallery/PA240154.JPG

zOU 02-04-09 12:00

Bump :p

what is the make/model of these cheap/nice aux lamps ?

coxwain 02-04-09 12:06

i think their the RING AUTOMOTIVE you can get them at halfords about �26 they do round or oval

zOU 02-04-09 12:10

Thx.
I'll have a look :)


All times are GMT +1. The time now is 03:23.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.