Intermot 2008 Supplemental
 

Here are some more pics and comments from the show. It's also my first time using photobucket, so please let me know if you have problems viewing this. I hope you all enjoy it.

http://s440.photobucket.com/albums/q...view=slideshow

Good slideshow - well presented - well done!

Thanks Josephau!
A looooot of goodies to buy to my Tenere there. Good to see how the black Motec Trax cases becomes the black tenere!

Good job on the slideshow, really appreciate it! :icon_thumright:

josephau do you think you could fit the touratech sump guard and tool box with any of the crash bars or are the crashbar bottom mounting bracket to low to be able to fit the sump guard

Thanx, Josephau! The industry picks up really well for our Tenere, don't they? The Givi luggage system is UGLY, never on a bike of mine! But hey, there's lots of other good stuff, that'll be functional and lookin'good! I'll be ordering some Touratech stuff shortly, see how fast they deliver. Greetz, Hans.

Good question and tough to know. My guess is no, because the touratech toolbox has to fit with their own "large" bashplate. Where the bashplate is mounted and where the toolbox sticks out seem to me that they would be in the way of where the crash bars from the manufacturers I've seen are going. You may want to take another look at the pics and judge it yourself.

While I was in Cologne, I also visited Off-the-Road and got some Nology ignition cable and NGK Iridium spark plug. My initial feeling is the engine runs a bit smoother, i.e. thumper sounds are at a slightly higher frequency.

I am also seriously thinking about getting their single-can exhaust. I picked up the stock exhaust that was lying around in his shop, then pick up their single can, boy, that's a big difference. He turned it on and let me hear it, the only way I can describe it is it is 'throatier'. I like it. Any suggestions or criticism on why I should or should not get this single can would be appreciated.

Off-the-road also told me that Wilburs have come up with some shocks and fork springs specifically for the Tenere, which also has something to do with lowering the bike and decreasing the front dive when braking. I wasn't paying too much attention to that as I was rushing to the bike show. Whoever interested may want to call Thorsten to ask about it.

josephau cheers for the quick reply had a good look at the pictures still not sure if it can be done but it would make a good combination

It's probably old age, I keep forgetting bits of info.

On shocks, Touratech is already offering on its catalogue Ohlins shock and fork springs, pricey, the shock is almost EUR 1000. I also inquired WP of making a shock for Tenere, they could only tell me they hope to have one sometimes in May.

Two things - while the quality looks great, I think it is a bit clumsy looking - ok, so it might need to be that big to house a catalyst? (we don't need one post registration in the UK) but the mounting angle looks wrong to me... it looks too 'aftermarket' in my opinion...

Also, and less subjective and more importantly - will it still fit with pannier frames? the exhaust clamp bolts through the frame where the pannier frame should attach... could be a problem?

xxx

ps. great pictures Josephau, they answered a couple of questions I had about the Motech racks particularly... in reply to a couple of points you raised -

• the Y shape frame guards are really just to stop the paint wearing off the steel frame from where you boot would rub (the steel frame WR's used to really suffer from this too).

• I agree the engine bars look silly (all of them do in my opinion) - why would you want all that pipework all over your svelte looking bike?! - looks like a bullbar on a 4x4 (which no serious rock-crawler ever uses)...

• the SW Motech EVO frames are quick release each side - there is a short bracket behind the numberplate holder that braces between the two rearmost supports (in another picture you posted you can see the QR screw heads either side). This is the only thing I don't like about the SW Motech frames - the fact the rear brace goes downwards to behind the numberplate, rather than straight across behind teh rear fender like the Touratech one. It means that if you reposition the numberplate higher (directly below the rear lights like I have done), the SW Motech brace will be hanging down in space... I'm sure it would be possible to modify the SWM frames and incorporate a straight brace like Touratech have, but it would be a shame to cut through all that lovely powdercoating...

Hi JMo,

Thanks for your comments. In relation to your question on whether the OTR single-can would fit the stock Yamaha case holder, I actually went there myself to try it and here is what we have found out.

What we (OTR) did was removed the screw on my pannier rack where the single exhaust would connect, because he wanted to see if the rack would come off by the size of a washer or two. He reckoned that if both points are slipped with a couple washers, then the can would fit. He also doesn't think the heat from the can would be an issue on the plastic panniers because it would only go up to 40 degree area.

I admit the 'tryout' wasn't exactly what I had in mind, which was physically and completely removing the pannier holder and bolting in back on the bike which he has with the single can. Granted, it took him more than he wanted to unscrew the rear joint because of the hidden location of the nut that is under and inside the top plate.

I agree with you that the angle just seems too after-market. He argued that he needed the length of the can in order to give more ps and torque, that's why it is not possible to have the can angle in a way that hug along the rear end of the bike, like the stock would.

As with other pannier rack especially his, I would imagine it fits because it sticks out a lot more than the yamaha pannier holder. The dB killer is about an index finger long or may be a bit longer and it is held by only one screw.

I am torn because the usual aftermarket guys seem to be making the dual cans. Arrow supposed to come with another dual this month. I saw some posts that some US or UK companies may custom-make them, but it's a risk for me due to German approval, warranty, and EU3. Yet over EUR 600 and the concerns above just don't seem ideal. I guess I should be patient and wait/hope/pray someone out there makes a jolly perfect one.