Where is it best to look at Yam tall screen, any one any pics. Can it be ordered on line or do I need to go to dealer (JaseXT, are JTs any good?)
I have found these for givi
https://www.motorbikesandparts.co.uk...model_id=XT660

Here's a pic of the Yamaha tall screen that I had on my XTR ........
http://i144.photobucket.com/albums/r...r/73f86d85.jpg
You need to order it from a Yamaha dealer, I don't think you can order them online.

Here's a link to Yamaha's site for a picture ....... http://www.yamaha-motor.co.uk/access...VK-W0710-30-01

Barry.

Cheers for that, looks just the job, will ring dealer in the mornin

Any yamaha dealer can get them as they are all marked up at the same price ,i have emailed tracker and am waiting for his reply or he may even contact you himself if he still has it

I really had an issue with wind/noise when i bought my XTR. But then again i didn't know better.....it was my first bike. Having a Arai TourX didn't help either. I got a Yamaha tall screen, and like everyone before me, it only took the wind of my chest...barely. But, a heluva lot better than nothing.

So i raised my light fairing/assembly with 70mm. Not much better, but being 6ft something, it might help less taller guys?

Im thinking: if you want quiet.....go by car.

I bought the OTR windscreen, don't know about the original yamaha screen since I got the bike mounted with Yamaha tall screen and the OTR version gives a LOT less buffeting.

I thought i'd post some pictures of my "raised" headlight fairing. I can just say that i think getting the wind off you if you're living "up north" is all about getting the cold off you. For us living in Africa, or Oz, or Southern Europe, etc, the wind is more of an annoyance then anything else...most of the time. in fact, i guess, it's not only welcome sometimes, but very close to critical. You can decide for yourself if it's worth anything. I got the idea from another thread called "XTR Rallye", i think. I did this because i so much want the OTR Rallye fairing, but the ZAR/Euro exchange is not very kind to us down here.

If anyones interested, i'll put the drawings in Word format and mail it to you. I made mine from 2mm 304 stainless. The best is to have them laser cut and then CNC bent.

http://i493.photobucket.com/albums/r...g?t=1232385993
http://i493.photobucket.com/albums/r...g?t=1232386950
http://i493.photobucket.com/albums/r...g?t=1232387026