![]() |
Quote:
|
|
I paid roughly 65 for my 3 lines from wezmoto. Great quality and with stainless fittings.
|
Quote:
|
They arrived today...Im impressed with the quality of them and the speed of the delivery too.
Like a big kid at christmas I was taking the old ones off within 5 minute of them hitting the floor. Wish Id paid attention to the postion of the two plastic p clamps..hmmm |
I didn't get any P clamps with mine so I bought some small stainless steel ones and re-used the original rubber clamp sleeves as protection for inside the p clamp, (cut for size) then fitted them to the fork legs with fresh stainless fasteners. My only advice (probably too late) is to loose-fit everything and check for cable rub on anything when the forks bounce up and down.
|
Good call on the p clips..I havent as yet fitted them..thats todays job..
|
Brake lines..upgrade?
Hi.
Thinking of getting these for my XT660Z. (Wezmoto ones). Does anyone have any pictures of them fitted? Interested in the routing for the front and the colors either black or SS/Transparent! Thanks in advance [emoji106] |
I got black as I wanted them to be unobtrusive and tbh most of my bikes black too.
Fitting wise they follow the same route as the originals .If your unclear then take some photos. Top tip..hold the front lever back to the bars for a few hours,with a cable tie. You could also use a flat vibrating sanding plate held against the calipers and lines to aide the air to flow upwards.Old skool tech but it works. |
Quote:
Thanks for the reply. Think I�m leaning toward the black as well. It was more to do with the front line routing as in the description on EBay it states �The kit comprises of two lines for the front of the bike which both travel from the master cylinder direct � This is what confused me as on the Z there is only one banjo at the master cylinder and it splits further down. Can anyone shed any light? Thanks again [emoji106] |
All times are GMT +1. The time now is 03:43. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.