Wheel bearings
 

Just wondering where everyone gets their wheel bearings from?
Going to replace the rubber this month and while wheels are off ill do the bearings, only 8k miles but 09 bike. Tubes and cush drive also being done.

Are they showing signs of being worn?...OR are you replacing them because they are 'old?'..

Replacing them as they are old and I'm there taking the wheels off. The front spindle isn't coming out that easily either so thinking it's best to do them

fair enough..i thought that modern bearings are pretty much bullet proof,at least in terms ofl asting due to age and not miles..is your spindle clean?..i use a wire wheel on a drill and copper slip!!

when i have changed bearings its either been ebay..you pays your money and you take your chances OR take an original to a bearing/transmission shop..


As for tubes and rim tape,again modern stuff is a lot more robust than when i was a lad. I have just had my original tyres changed and the tubes and rim tape were in perfect condition. My bikes just clocked 10,000 and is 8 years old.

It's for peace of mind, I think the xt has sat outside for a short time with a previous owner, the pinch bolts on the front are in need of a major clean. I haven't been able to get the spindle out yet but it will be getting copper grease added to it.

I'm going to do the tubes again for peace of mind, the tyres are still well within the legal limit for tread but they are cracking so off to the bin.

That's good to hear that the original tape and tubes were still good

I,ve got a 09 bike with 37k on it and I bought a set of bearings from the Bearingboys for about 25 quid a set, haven't fitted them yet as mine still feel smooth. SKF 6203 2RSH x 4bearings f & r ID 17mm OD 40mm Width 12mm
SKF 6304 2RSH sprocketcarrier bearing ID 20mm OD 52mm Width 15mm

Thanks for that, great to have the info to hand.
I'll get the front wheel off this week and I'll see how they feel and maybe save myself a few quid

They are always sending me codes now so if you decide to buy before end of June here is the latest one with 20% off. BEARINGJUNE20.

XT660R, 2007,
front bearings changed at 50 000 km, as preventive maintenance (2016),
rear bearings changed at 40 000 km because they developed slight noise under some lean angles.

I forgot to mention that i bought a 14mm hex head oil sump nut removal tool from a car shop fot �3.50 to remove the front spindle.

After undoing the pinch bolts I couldnt move it with 2ft breaker bar BUT it turned immediatley with a battery operated impact gun!