Kev mod fitting
 

Got the fuel mod found the temp sensor do i still need the temp sensor? Or does the mod override it cheers folks


Xt660x 04

Yep you still need to use the Sensor

Ive cut it off & wired it into the back when at 12 o clock i have engine light on put to 3 o clock and seems fine inly has standard filters snorkel removed and aftermarket pipes


Xt660x 04

You only need to cut one wire !
One wire of the Kev mod goes on the wire that goes to the temp sender
The other wire of the Kev mod goes to the other end of the wire which goes into the loom
The Kev mod works with the temp sender to trick the ecu into thinking Ulf air is colder than it actually is, so puts more fuel into compensate, richen you mixture,
I thought all the Kev mods came with an instruction sheet ??

Didn't get one im afraid i have pmd kev awaiting him to send me the link to pdf said he's had problems with certain email addresses its on now and feels better will await proper instructions :/


Xt660x 04

You only need to cut 1 wire which is Black / Blue one

All sorted now folks not really noticed a difference waiting for stage 1&2 filters i have the fuel set to just under 3 o clock i have no snorkel and standard filter


Xt660x 04

http://img.tapatalk.com/d/14/07/10/3yde4ugy.jpg


Xt660x 04

This does not look too good/safe. You could try a bit harder. I will just solder wires together to be safe, and if i will ever remove mod, there's still plenty of wire left.

Thank you. I didnt have a solder but will have it done as it will be safer thank you :)


Xt660x 04