![]() |
Kev mod fitting
Got the fuel mod found the temp sensor do i still need the temp sensor? Or does the mod override it cheers folks
Xt660x 04 |
Quote:
Yep you still need to use the Sensor |
Ive cut it off & wired it into the back when at 12 o clock i have engine light on put to 3 o clock and seems fine inly has standard filters snorkel removed and aftermarket pipes
Xt660x 04 |
You only need to cut one wire !
One wire of the Kev mod goes on the wire that goes to the temp sender The other wire of the Kev mod goes to the other end of the wire which goes into the loom The Kev mod works with the temp sender to trick the ecu into thinking Ulf air is colder than it actually is, so puts more fuel into compensate, richen you mixture, I thought all the Kev mods came with an instruction sheet ?? |
Didn't get one im afraid i have pmd kev awaiting him to send me the link to pdf said he's had problems with certain email addresses its on now and feels better will await proper instructions :/
Xt660x 04 |
Quote:
|
All sorted now folks not really noticed a difference waiting for stage 1&2 filters i have the fuel set to just under 3 o clock i have no snorkel and standard filter
Xt660x 04 |
|
This does not look too good/safe. You could try a bit harder. I will just solder wires together to be safe, and if i will ever remove mod, there's still plenty of wire left.
|
Quote:
Thank you. I didnt have a solder but will have it done as it will be safer thank you :) Xt660x 04 |
Looks like you cut the Brown/white wire WHY? You need to solder the wires back together & insulate them.
|
|
I have no idea why?
My mod came with the wires in opposite ends i just wired the blue & black wire into it. The orange and white wire will be solderd and is currently insulated Xt660x 04 |
Quote:
That helps a lot this is what i needed but had no instructions. I received the instructions a day or 2 later. Xt660x 04 |
All times are GMT +1. The time now is 21:18. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.