6'3"
 

I feel mines a little to small, haha

for a 6 ft 3 rider would you say the 20mm ones are best for me?
wheres best to get some i could try? off road proof :)

had hyperpro springs on the front,
anything else worth a shot for the rear?
cheers

I put the +35 bones on and as there was a lot of front sag I put some of the small(about 3" long) fork springs from an 86 XT 600Z in and it raises the front perfectly so everything sits the same. Seems to work OK but not tried them in anger off road yet. still looking for a two into one and a better sump guard, but they are like hens teeth!

thread revival!!
 

I have been searching for a uk based firm to make some rear links.

Projection-racing.com make them.

Would the fork spacer mod balance the suspension up or is it a case of fork extensions?...

I received my 660R with valves fitted to the fork caps, by pumping in a little pressure you can change the ride height big time. Works for me

A high pipe will gain yer 60mm under the motor....





...

My query was/is more about raising the combined (front and rear) height of the bike without upsetting the geometry.

6'2" and 14 stone dont make me a big man but the bike looks small when Im on it.

Just got some fork spacers but dont know if there going to need fitting at same time as raising the rear or can they befitted independantly.