.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Cush drive rubbers cure ( https://www.xt660.com/showthread.php?t=21410)

Seahorse 27-09-13 07:05

Did anyone hear back from Hunday regarding the polyurethane cush-drive rubbers.....???

Landton 27-09-13 17:12

No

Skickat fr�n min GT-I9295 via Tapatalk 2

Hunday 18-02-14 21:14

Cush drive rubbers
 
My apologies for only getting back to you now.
The Cush drive rubbers are available now.
Quote:

Originally Posted by Crazydog (Post 23694184)
Like all of us that have the XT660`s , the cush drive rubbers wear is a pain.
http://i127.photobucket.com/albums/p...9-23170241.jpg

I found an article some time ago on the XT660.com thread.

The chain drive sprocket takes a tremendous load from the power of the engine , which causes the rear wheel bearing to wear excessively , even wearing the Chain Drive Hub Housing ,
The bearing will become loose in the housing at a later stage,

I fitted a double row bearing as apposed th the std single *row bearing.
And with Polyurethane rubbers .I got 56 000km without changing the rubbers again.

You only have to machine the rear hub bearing housing 5mm deeper /
The Bearing I used is still the same dia. as the original.
And machine the inner spacer also 5mm shorter.
It still uses the Standard Yamaha Seal

http://i127.photobucket.com/albums/p...psc5bb6b14.jpg

http://i127.photobucket.com/albums/p...ps36e80f90.jpg

[size=10pt][size=10pt] New Bearing no, 62304 [/size][/size]



http://i127.photobucket.com/albums/p...1-10104855.jpg

Polly Rubbers R950 posted , South African Rands or $95 Aus Dollars /�54 uk

accentgt8@gmail.com



Polyurethane Rubbers Now in stock .
Can be posted anywhere in the world

Pleiades 18-02-14 22:12

You have mail.

tripletom 18-02-14 23:02

and from me

Sandman 19-02-14 00:00

Mail from me too

Hunday 19-02-14 06:46

Cush Driver Rubbers
 
PM sent , Cush Driver Rubbers being mailed Today once I receive an email from Paypal

Hunday 25-02-14 21:39

Quote:

Originally Posted by fridolin (Post 192273)
Hi Hunday,
what size is the double row bearing? I only found one with 20x52x21.
If so, wouldn't I have to have mill 6 mm deeper and shorten the inner spacer 6 mm as well?

Regards
Marcus

Bearing no, 62304

tripletom 01-03-14 18:20

Quote:

Originally Posted by Hunday (Post 197338)
PM sent , Cush Driver Rubbers being mailed Today once I receive an email from Paypal

Looking forward to trying them out. I think they'll replace the 3rd or 4th set of OE rubbers and inner tube..

Bear067 01-04-14 05:23

Pm Sent from me


All times are GMT +1. The time now is 03:42.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.