.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Suspensions & Steering ( https://www.xt660.com/forumdisplay.php?f=50)
-   -   YZ forks on XT660Z - update ( https://www.xt660.com/showthread.php?t=19999)

ramarvarna 12-12-12 21:21

YZ forks on XT660Z - update
 
The new forks are already fit on my Tenere. I using Yz 450 2006 forks, (46mm top, 49mm bottom) triple clamp was from was from WR 450 2005. The size was 44mm / 48mm and I machined it 1mm top and 0.5mm bottom to be able to put the forks in. I using the original Yamaha steering stem. Bolt it without problem, only on the top clamp i have to put 1mm spacer between the stem and the clamp(the original stem was top 25mm, the new is top 23mm. The front wheel is from YZ 450.I also changed the handle bars with 28mm. What is left is oversize brake disk 270mm. I did today a proper test.
I need to change the springs with stiffer, It's ok the way it is now but I want to make a proper sag .I already ordered 0.52 this is the stiffest I can get. The rear shock is soft(it will be replaced with Ohlins) and lift it with new bones (35 mm) Some pictures from today:
https://picasaweb.google.com/1111224...67208256081378
https://picasaweb.google.com/1111224...67446019080594
https://picasaweb.google.com/1111224...67629240487890
https://picasaweb.google.com/1111224...67763425992386
https://picasaweb.google.com/1111224...68117483288802
https://picasaweb.google.com/1111224...81233967687378

Mort 12-12-12 22:46

Looks the dogs do das mate.Any other mods in the pipe line.?:wav:

ramarvarna 12-12-12 23:05

Quote:

Originally Posted by Mort (Post 181758)
Looks the dogs do das mate.Any other mods in the pipe line.?:wav:

MS Racing exhaust , power comander, I bought it with.

Pleiades 12-12-12 23:18

...and a mudguard! ;)

On a serious note, you've done a great job on the conversion - well done!:023:

RafaelMartins 13-12-12 01:36

Beautiful work mate!

Kev 13-12-12 10:17

Nice work, now in the XTZ mod section.

http://www.xt660.com/showthread.php?t=630

ramarvarna 13-12-12 13:07

Quote:

Originally Posted by Pleiades (Post 181762)
...and a mudguard! ;)

On a serious note, you've done a great job on the conversion - well done!:023:

The mudguard is ordered from Off the Road, it's on the way.

Landton 15-12-12 13:54

Beautiful, but what does the brake come from? If the brake is from a YZ & you use the XTZ orig brakepump how does it work? The clamps does not hit the cooler in full steering and how did you get the steering stops to work?

My self are almost finished with my plan to mount a USD to my XTR.
I got clamps from a KTM 690 Enduro R so I mod the orig stem a little "will start a new thread" but will take picture how much I change. The forks are from a KTM660 and the brake are the same on KTM660 is a Brembo 4 pistons. Got already a black KTM EXCEL wheel left from my late KTM690 Enduro R before I sold it.

But now the plans have change a little bit. I won at Ebay a complete black KTM Enduro R 2012 forks and clamps so will wait before I mount it + I would like a normal brake instead of the Brembo 4 piston and a 320mm disc. 300mm disc is what I want instead. So in January I probably will upload some picture ! :)

ramarvarna 15-12-12 20:53

Quote:

Originally Posted by Landton (Post 181842)
Beautiful, but what does the brake come from? If the brake is from a YZ & you use the XTZ orig brakepump how does it work? The clamps does not hit the cooler in full steering and how did you get the steering stops to work?

My self are almost finished with my plan to mount a USD to my XTR.
I got clamps from a KTM 690 Enduro R so I mod the orig stem a little "will start a new thread" but will take picture how much I change. The forks are from a KTM660 and the brake are the same on KTM660 is a Brembo 4 pistons. Got already a black KTM EXCEL wheel left from my late KTM690 Enduro R before I sold it.

But now the plans have change a little bit. I won at Ebay a complete black KTM Enduro R 2012 forks and clamps so will wait before I mount it + I would like a normal brake instead of the Brembo 4 piston and a 320mm disc. 300mm disc is what I want instead. So in January I probably will upload some picture ! :)

Hi Landton,
yes, I use theoriginal XTZ brakepump, it work with no problem. The brake hose is for YZ 130mm. I will put 270mm YZ oversize brake disc with adapter, I already bought it. It should be ok. At the moment is with 250mm. Yes it is different than the stock(2x298mm) but I am not a fast rider and I prefer one disc instead the heavy two. The clamps are ok, the stoppers I didn't set. Coolers are ok, now the clamps stop in the plastic cover of the keylock holder. See the picture:
https://picasaweb.google.com/1111224...62093582848450
The only cons is that it make a little bit small angle now, which I don't care at all.
I look forward your conversion.

Landton 16-12-12 18:09

Quote:

Originally Posted by ramarvarna (Post 181847)
Hi Landton,
yes, I use theoriginal XTZ brakepump, it work with no problem. The brake hose is for YZ 130mm. I will put 270mm YZ oversize brake disc with adapter, I already bought it. It should be ok. At the moment is with 250mm. Yes it is different than the stock(2x298mm) but I am not a fast rider and I prefer one disc instead the heavy two. The clamps are ok, the stoppers I didn't set. Coolers are ok, now the clamps stop in the plastic cover of the keylock holder. See the picture:
https://picasaweb.google.com/1111224...62093582848450
The only cons is that it make a little bit small angle now, which I don't care at all.
I look forward your conversion.

Great to hear, gonna try to use orig brake but with stainless brakehose. Yes will get back when I got the items! :)


All times are GMT +1. The time now is 12:24.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.