Many thanks
 

Thanks to this great write up, I did my 20,000km service today. Inlet clearances needed a tweak, but to my surprise, exhaust side was spot on. (I bought the bike at 14,000km, so maybe they've been set previously) all in all, an enjoyable days spannering and nice to know it's all tickety-boo.

Brilliant step by step.....I'm sure myself and many others will refer back to write up and photos, thanks Steve

Help please
How kick air from fuel sistem? Xtx dont wont to start after dismountig fuel tank(and valve check)

The system is self-priming, so bleeding air out should not really be an issue.

Just double check you have clicked the fuel line connector fully home. If it hasn't snapped into place, no fuel will flow. For that matter check the electrical connections are good too.

Can you here the pump priming when you first turn the ignition on?

Pump is working.
If put hose in botle and turn key gaselin is pumping
On start sprey hi working,no sprayng hi go of
Sorry for my english

Update
Xtx is working :)
Fuel pump was the problem . Litle o-ring was not on his place and there isn't enough fuel preshure.
Thanks for diy guide for valve clerance

Thanks
 

Awesome post

fuel filter
 

where is the fuel filter on the tenere?

Nice. Thanks for the step by step. Hopefully my 20k service will go as smooth.