Tail Tidy Pics
 

Now that i have done the TT, i want to put LED Flasher on but i undertand the wont work same as the normal globe flasher neeed to some sort of modifiction cus the LED??

Yes, if you replace the standard indicators with LED ones then the flash rate will be too high. To fix this you need to load up the indicator circuit with some big resistors (sometimes included with the LED indicators you buy), or like I did you can buy a replacement flasher relay, which is not cheap (about �20 ukp) but is plug and play and a much neater solution.

Lee

For the indicators, LED ones, you will need to fit a LED Flasher unit, Yamaha specific or else the std flasher will make the indicators flash way too fast...

Motrax make one which i have used on my XT before and works well.....

www.motrax.co.uk

http://www.motrax.co.uk/index.php?mo...uct&id_prd=162

I have one of these in my garage so if you can't source one in SA then let me know and I can send you one. Its brand new in the box. Call it �25 incl of postage.

drop me a PM if you need one

Cheers

WB

Or do what kev did, made his own resistor for the leds.

http://www.xt660.com/showthread.php?t=6206&highlight=resistor

Hi there 450X
I got a flasher unit from Startline in Edenvale, JHB....was around R 70 I think. I also bought my LED tail light and indicators there. It was about R 1000 for the lot. The flasher unit's 'plug' is not the same as the OEM on the XT. I destroyed the original, but kept the plug, and soldered it onto the LED unit, sealing with silicone. I am not to sure if I bought to cheap, or if I did the mountings to 'rigid'. After 800k's, my taillight was destroyed internally, and my rear indicators came loose inside.....because of vibration. I am busy changing it now.