Originally Posted by Kev (Post 230355)

Not since 2014.

You can make your own: http://www.xt660.com/showpost.php?p=202155&postcount=49

http://www.xt660.com/showthread.php?...ht=fork+spacer

Originally Posted by Kev (Post 5308)

A cheep way to get a stiffer feeling front end. Tired of the front end diving excessively when braking hard, fitting the spacers adjusts the preload & raises the sag which alters the caster angle & makes for a better handling front end.

Then this mod is for you, the sizes are 30mm in length, width is 38mm & inside diameter is 20mm

Originally Posted by tlexup (Post 6910)

Nice input Kev, thats a reasonable low cost mod. I also try in other bikes to raise a bit the oil level, just a bit no more than 25-30 cc wich is aprox 20mm level. Thats provide an extra stiff force on the last travel of the forks. The suspension become stiff when is almost topped down. It has no efect on the fist 2/3 of the travel. But you have to be carefull do not overfil the legs or you'll blow out your seals soon.

Just an input...nice mod KEV

Originally Posted by Steve'O (Post 230885)

Link to buy the spacers don't work? Can you send me one that does? Thanks

Originally Posted by Steve'O (Post 231569)

Exactly what was the extra amount ml of oil you added to each leg after fitting the Spacers?
Thanks Steve'O