Rattle in my motor
 

Since I bought my bike & before I did the Raptor 700 conversion I always had a small rattle in the motor on start up from cold.

Of late it has started to bug me & has got worse, so I had a look into the problem. What I found was the oil was draining back into the motor when it stood for a few days & would rattle until it had oil pressure. I removed the oil filter & found the oil was draining back through a oil gallery that has a one way valve in it, this gallery should always be full of oil no matter what.

I ordered the parts a few weeks back from Japan & removed my clutch cover, to replace the ball, spring & seal that hold the oil in the gallery. I retested for the oil draining back & it has stayed full after the repair, so I am happy again.

As you can see I always full the oil tank with 1500ml of oil & the remaining 1200ml I full through the engine breather. Start the bike then adjust the level as needed. Much easier this way, no messing around.

http://i201.photobucket.com/albums/a...vxtx/1copy.jpg

http://i201.photobucket.com/albums/a...vxtx/2copy.jpg

http://i201.photobucket.com/albums/a...vxtx/3copy.jpg

http://i201.photobucket.com/albums/a...evxtx/5-12.jpg

http://i201.photobucket.com/albums/a...evxtx/4-16.jpg

http://i201.photobucket.com/albums/aa202/kevxtx/9-7.jpg

http://i201.photobucket.com/albums/a...vxtx/9copy.jpg

http://i201.photobucket.com/albums/a...evxtx/10-7.jpg

Excellent work as usual Kev!! :clap: :clap:

Nice one Kev,

So wish you lived in the UK mate!!!

Cheers

WB

Great work Kev.

I hope you washed that Pyrex dish before you gave it back to the wife.......



Nick.

As any good mechanic knows, make sure you use your wifes best Pyrex jug in the house she won't mind. One needs to measure things correctly, I best put it back before my wife fines me using it.

Ok, found the thread myself (already sent a message to Kev about where did it go :P)

About those parts - do I have the part numbers correct:
583-13113-00 SEAT, CHECK BALL
93503-08007 BALL
90501-04X01 SPRING, COMPRESSION

Great Kev, :bravo::bravo::notworthy[1]::notworthy[1]::notworthy[1]::notworthy[1]:

I also full the oil in two step,like you, 1500 in the reservoir and 1200 always from the cover distribution chain. I never thought to fill the oil by engine breather !!!!!!!!:eusa_dance::thumbsup[1]::thumbsup[1]::thumbsup[1]:

Also the wife's tool is a great idea........

Thank you Kev.

The oil runs back into the sump when the one way valve leaks, when you start the bike it takes 30 second to blead all the air out & the motor has a cold start rattle. Mine rattle went away when I replaced the one way valve.

excellent work Kev! Thanks for the photos and tips mate!

[quote=Kev;84279]Since I bought my bike & before I did the Raptor 700 conversion I always had a small rattle in the motor on start up from cold.

http://i201.photobucket.com/albums/a...vxtx/1copy.jpg

ote]
Hi, Kev,

a question. What is the insert in the water tube upper water pump. It's seems like a radiator. Is a commercial part, or you have done by yourself ??

Thank you. Ciao.