.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   2007/2008 models and PCIII ( https://www.xt660.com/showthread.php?t=7785)

MT-03Coyote 15-09-08 09:43

2007/2008 models and PCIII
 
Hi All, I've read a lot about PCIII and lambda sensors on 2007/2008 models...

Is there, since June 2008 (last post on the subject), any 02 eliminator available (Kev, Dynojet, other...) ?
Has somebody installed the PCIII on a 2007/2008 model and what are the results ?

Thank you all in advance. Keep cool on the roads.
Paco.

Kev 15-09-08 12:23

There are a few of us running PCIII on 07/08 models.

I am still working on the O2 simulator for the 07/08 models, I have had to change the design a few times. I am finding this ECU a real pain in the Arse. I hope to have my new Wide Band 2 Commander this week & will carry out some more test to fine tune things with this tool before heading to the dyno. http://www.dynojetwb2.com/wb2_products.aspx

I am also working on the Raptor 700 ECU conversion to the XT, so I can have a higher rev limiter & fit a Dynojet ignition module to play with the ignition timing. I have done all the theory just looking for the parts at the moment.

MT-03Coyote 16-09-08 00:19

"There are a few of us running PCIII on 07/08 models"

TY Kev, but what are the results ?
Effective on the full range of revs, or just above 4000 rpms ?
Or am I totally wrong...and it is not a problem ?

Paco

Kev 16-09-08 05:13

On mine the surging starts between 5 to 15% throttle even with the PCIII.

The PCIII has allowed me to set my air/fuel ratio fine above 3500rpm, below 3500 is where I am trying to fix with my O2 simulator.

MT-03Coyote 16-09-08 09:33

TY Kev for your always kind and appreciated availability !

Paco


All times are GMT +1. The time now is 13:30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.