Problem rear cover
 

The rear cover is hold together by the grab bars and 2 plastic pins. I can not figure out how to loosen the platic pins. Help me please.

The rear cover is hold together bij the grab bars and 2 plastic pins I can not figure out how to loosen the plastic pins. Help me please. Sorry something went wrong.

Right....just figured your post out :D

Simple...get a thin screwdriver and push the little round bit in the middle downwards. Then pull the whole thing out ;)

Thank's Denny

Storm,

You push the plastic pins upwards, or place a small screwdriver just underneath the middle of pin and 'prize' it upwards. Had my plastics off in the week, but don't push them downwards mate, or else you will knacker them..

WB

I've taken mine off countless times that way without knackering them ;)

Also, some cars have them holding the arch liners in place which is not accessible from behind, hence being able to push the middle bit.

Yep you push the wee plastic bit in the middle down. But to reset it again you have to take it and push the pin back up in and just out the top. Its a bit of a pain sometimes but they do a good job as they are light and dont cost as much as bolts etc.