Front Brake Cable Position
 

Hi all. New XT660R today :-) Just a quick question. The front brake cable obscures the speedo under normal riding conditions, is it ok to use a cable tie berween the hydraulic tube and the handlebar to just pull the cable slightly out of the line of sight ?

I think this would be fine but don't want to mess with it without asking for advice first ...

Thanks in advance, - Steve

Of course it is ok, as long as you do not pull it in such a constricting way that would result in the actual hose being squeezed, don't forget these are hydraulic brake lines and need to shift fluid when engaged.

However I am aware that while the XTX comes as standard with a braided hose front line, while the XTR has a plain rubber hose, perhaps, if in future you would wish to improve your brake action investing in a Hel Braided brake line (much better in my opinion, I guarantee you) then you could re-route the newly fitted braided hose in a slightly different position and with enough lenght to avoid it overshawdowing your speedo.

I have replaced my rear rubber hose with a braided one and I have noticed a definate improvement in braking action.

Let us know how you get on.

hello..i dont see why not as long as the hydraulic tube still has a flowing curve.Mine is the same but after 10 minuets of riding you dont notice it,more to the point i am too busy at looking at birds :)

Thanks for that. There's a few upgrades I'd like, the hoses as you suggested, some hand guards and the belly protector. Then maybe I'll look into some nice cans ... :-)

When you do, come and ask us, we have a corporate deal with Carbon Can Co as follows:

Remember these are not retail prices but discounted deals available only to our members and the prices shown here include delivery costs to UK hence if you live outside UK you will have to be prepared to pay a little extra in postage:

(all cans include link pipes and 2 sets of clamps per can)

Stainless Steel Round cans = �240.00 all in - Same as above but in oval shape extra �30.00
Carbon or Titanium sleeves: �340.00
Coloured Titanium sleeves: �390.00
Twin pot extra �30.00

All above cans have similar 55mm bore, but....

their top of the range line of 60mm bore shorties in Carbon and Titanium as used by myself, zambezi, nein, and speedyg the price is �440.00

Phone them up, make sure you ask to speak to Simon and tell him I sent you.

Carbon Can Company - 2 Albert Street - Fleetwood - Lancs FY7 6AH
Tel: 01253 877900 - Fax: 01253 870599 - sales@carboncan.co.uk
http://www.carboncan.co.uk/