Turn lights working but indicator not
 

Hi guys,
Need some help here, I replaced the two fron turn lights, which are working (when pressing the alarm) but the indicator or the hazard lights do not. I tried going back to the old lights, but still the indicator doesnt work.
I tried also checking the relay (swapping with another) and checking all the fuses. Also no clicking sound either. I opened the indicator box and all seems ok. Any ideas???????

Neither front or back indicators work?..Are they standard or aftermarket?..

All 4 works, but only when pressing the alarm, not when clicking the indicator or hazard.

Have you tried an actual turn signal relay?

I swaped the one i have from another bike and still didnt work.

Did/does the original work on the donor bike?

Yes it does. Is there any other part that is linked to the indicator that o can check?

only thing i can think off is to spray electrical contact cleaner in the switch itself
....have you taken it apart at all?..

Sounds like the two new indicators are LED you need an aftermarket relay that works with both options you can get them off eBay.

Thanks. Will try.

Ermmmm I did ask if the indicators were genuine or aftermarket....

so, i tried the spray electrical contact cleaner, didn't help. and now i'm noticing the ignition is a bit slow (the battery is new) and the tail light only works when braking and not during drive. @waynovetten, you mentioned a relay, should i be looking at a specif model or any relay is good?

Although the battery is 'new' is it charged?..holding a charge?

is the headlight working?..is the bikes charging system working?..

Any led relay will work with AFTERMARKET led indicators.. are all four genuine or aftermarket led's?..or a combination of both?..

sorry, didn't catch that :)
front two are led, back are genuine currently (just ordered another set).
Head lights working also, as for battery charging - how is this checked?

https://www.wish.com/search/let%20tu...7e361bb280d04e

https://www.wish.com/search/let%20tu...7e361bb280d04e

Voltage: 12V
LED Number: 12 The power of each lamp is 0.85w)

All four need to be either led or genuine/oem/normal bulb type.
Ebay for a flasher unit,something like this or similar
http://www.ebay.co.uk/itm/Motorcycle...item4b192c2aaf
IF everything was ok before the change to led indicators then its a good bet an
appropriate relay will sort.

thanks for the link! all good now.