.: XT660.com - The #1 XT660 Resource :.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Newbies Reception Lounge ( https://www.xt660.com/forumdisplay.php?f=23)
-   -   possible ecu fault ( https://www.xt660.com/showthread.php?t=27353)

CaptMoto 16-12-17 23:50
Next port of call is to check your wiring loom (specially under the tank) for corrosion, water from the front wheel on these bikes tends to cause all kinds of problems such as corrosion on the wiring loom and any spike or shortage can throw off the sensor and the ECU.

jimbobjimmy 17-12-17 21:43
Quote:
Originally Posted by CaptMoto (Post 232656)
Next port of call is to check your wiring loom (specially under the tank) for corrosion, water from the front wheel on these bikes tends to cause all kinds of problems such as corrosion on the wiring loom and any spike or shortage can throw off the sensor and the ECU.
Hi all the wiring loom was checked motorcycle shop said they never seen such a good clean loom looks virtually new no corrosion any where.
bike is immaculate only done just over 4k.
thanks Jimmy.


All times are GMT +1. The time now is 00:56.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.