.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Suspensions & Steering ( https://www.xt660.com/forumdisplay.php?f=50)
-   -   Xtz ohlins fork spacer or not. ( https://www.xt660.com/showthread.php?t=27021)

tougefc 29-06-17 10:36

Xtz ohlins fork spacer or not.
 
Hey guys, i have searched this forum and found some info on it but posts i read were not exactly clear.

So ive just received my new ohlins fork springs today (from otr)
Part no 08716-60 . Upon inspection there are no spacers included. Ive read other posts saying there are supposed to be 40mm spacers included?

My bike is a 2011 xtz. I plan on fitting the springs over the weekend do i use the factory spacers or install without them?

Cheers ,
-Simon

greatescape 30-06-17 09:26

My Ohlins springs (for 2014 Ten) came without spacers , this meant doing a bit of maths and cutting down the factory spacers. The Ohlins springs and oil have transformed the front end of the bike by the way! , I was a bit sceptical about how much I would feel the difference but you absolutely can. I also have the Teknik valves to add as soon as work allows. Steve

tougefc 30-06-17 12:36

Thanks for your reply Steve. Yeah i think i might try them with the factory spacers and then if no good cut them down to suit

tougefc 02-07-17 10:06

Well I installed the new ohlins springs today and used the original spacer. everything went back together fine.


Also I noticed in another thread ( not sure which one) but someone asked if the ohlins were marked or stamped... answer is yes at only at one end see pic:


https://farm5.staticflickr.com/4009/...ed009baf_k.jpg[/url]

Petenz 05-07-17 08:13

Are they 6 Nm/mm ? " last 2 didgets in the number... 60 "6.0"
If so they are quite heavy so you may not need spacers..


..


All times are GMT +1. The time now is 14:47.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.