Photos needed for cutting plastic on XTX for Tail Tidy
 

Photos needed for cutting plastic on XTX for Tail Tidy does anyone have any they can post so i know where to cut the plastic?

Thanks:038::038::038:

cant find my photos BUT when you take the tail piece off you will see the bracing rail between the two rear frame rails...i used a wood saw to cut across that line ..

Attachment 6985

Cut it today
 

I did it today but the problem i have now is i have fitted an after market tail/break light and only the break light seem to work do you know what i should do?

This it the light.
http://www.ebay.co.uk/itm/3307752696...%3AMEBIDX%3AIT

depends on the colours of the wires from your rear light setup...have you checked you have not blown a fuse trying to match them up?..

I noticed that as well when I connected the after market led tail light. When I connected the cables wrong the brake light was always on. I switched around the cables until I got them right.

Now the tail light works but now break light?
 

Hi i've fitted a tail tidy to my 2010 xtx today everything went ok apart from the fact that the tail light break light don't seem to be working i know it does work because when i was fitting it the first time round only the break light would work and nothing else well i swapped the wires round now the tail light is working but not the break light can you help with any advice please .

Cheers Steve:violin:

I have moved this thread to the Electrics section where it should have been posted to begin with :)
:fight:

have you checked the fuses yet?...connecting them up wrong blows the 10 amp fuse..

Sorted now cut it yesterday cheers