.: XT660.com - The #1 XT660 Resource :. - Problem with triple clamp bushings

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� General Discussions ( https://www.xt660.com/forumdisplay.php?f=129)

- - Problem with triple clamp bushings ( https://www.xt660.com/showthread.php?t=26156)

Mondrulho

03-09-16 05:57

Problem with triple clamp bushings

Hi, I mount a renthal fabar with OTR risers 3cm. Because my triple lamp bushing (the right one) was to loose I order a new set of bushings in OTR.
The problem now is, the bushings are to soft and the risers are made of two pieces. The handlebar is to lose and when I force it, it rotates... Something is not right...

Any suggestions? Yamaha only sell the complet triple clamp...

You can see the video here:

https://youtu.be/PPTvJvjEB6A

Petenz

03-09-16 07:14

silly question ..
are the bolts tight... real tight..

both the top & bottom rubbers should have a combined
length less than the thickness of the triple clamp so
they tighten up...

.

Mondrulho

03-09-16 22:37

Yes, it is everything well tight... The only thing I see is the rubber is to soft...
At the moment the only solution I can see is change the triple clamp...

Untamed m e

02-12-17 22:17

Solved?
I have to change bushings on my tenere xt660z but, your video discouraged me to buy bushings from otr... Was t bushings or something else?
Thanks

All times are GMT +1. The time now is 02:13.