Indicator issues
 

As soon as I turn on my bike the left indicator is automatically on, and it cannot be cancelled. I can still use the indicator switch to start and stop my right indicator. But the left one stays on!

I�ve taken out the relay, fuse (10a one outside of the fuse box). Fuse was fine and the flasher was working fine.

I think the issue started with only a dim dash indicator signal staying on then slowly progressed to the left indicator being on constantly.

It was heavily raining today, and I have aftermarket led indicators/relays. I�m pretty sure it�s not the wiring as I have soldered then wrapped them in electrical tape. I have had the indicators for 2 months now and Both times they have acted up in the rain.


Can anyone help me?

And you've cleaned and checked the indicator switch itself?

or maybe it's a short circuit in the dash indicator light?
You van check the wiring diagram to see where there can be a short

I'm going to use this thread not to start a new one

Was taking the exhaust off to check something, had to take the tail off as well
Luckily I did this, indicator wire worn through on plastic, as I pulled on it, the wire separated, soldered it and taped it, then tied the three wires together to centre to avoid it happening again

https://c7.staticflickr.com/1/621/31...2cfcddea_b.jpg

https://c3.staticflickr.com/1/517/31...f3bb24b7_b.jpg