power commander for tenere ?
 

hello ,
i found from an add a used power commander usb 3 which was on a xtx660 .
the strange thing is that its the 412-410 model , not the 412-411 model .
does anybody know the difference between the 2 models and if it will work on my 2008 xtz 660 tenere ?

The correct PC3 for the MT-03 is a 422-411 according to Dynojet.

The correct one for the X/R is 412-411 (which will fit/work on the Z). There wasn't ever officially a PC3 for the Z as the Tenere came out in 2008 when the PCV had just been introduced and that is what Dynojet recommended - there was no need for them to produce a PC3 specifically for the Tenere. OTR advertised/sold a PC3 for the Tenere for a few years but that was always the 412-411 X/R version with a different sticker on the box.

The 412-410 PC3 is for the Raptor 700. Several people have successfully used this one on the XT660, although AFAIK the length of some of the wiring to/from the various piggyback connectors is slightly different and may need careful routing.

i believe i found the answer in the thread above .
http://www.xt660.com/showthread.php?t=5315