.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   foot pegs ( https://www.xt660.com/showthread.php?t=23633)

Hedgehog66 14-03-15 14:04

foot pegs
 
any one no if wr or yz front foot rests fit a 2013 tenere,cheers:gsmile:

Pleiades 14-03-15 14:30

These will fit the Ten:

1996-2005 Yamaha YZ 80,
1987-1996 Yamaha YZ 125 / 250,
1987-1993 Yamaha YZ 500,
1990-1997 Yamaha WR 200,
1990-1997 Yamaha WR 250,
1987-1993 Yamaha WR 500

Read this thread regarding the above pegs available cheap on ebay. Some of the links might be out of date, but you'll get the idea. ;)

Hedgehog66 14-03-15 15:09

foot pegs
 
thanks for that ,role on wales

seedy 14-03-15 15:12

Quote:

Originally Posted by Hedgehog66 (Post 207648)
any one no if wr or yz front foot rests fit a 2013 tenere,cheers:gsmile:

http://www.ebay.co.uk/sch/m.html?_od...Text=&_sacat=0
:whisper:

Desert Racer 15-03-15 00:08

I've been wondering what other foot pegs fit the Ten too, other than pivot pegs. Cheers


Sent from my iPhone using Tapatalk

WeaveMcQuilt 16-03-15 00:04

I think my wide steel ones are from a TW200 or a TTR, can't figure out which.

All I had to do was bore out the fixing hole from 8mm to 10mm and they went straight on.

Pleiades 16-03-15 00:48

Quote:

Originally Posted by Desert Racer (Post 207677)
I've been wondering what other foot pegs fit the Ten too, other than pivot pegs.

I have had the SW-Motech footrests for four years now. Much wider than stock and can be set in two positions, stock height or 15mm lower. Been very impressed - made things a lot more comfortable on long runs, as well as standing and removing the rubbers leaves a good serrated non-slip surface.

https://www.motorradgarage.com.au/fo...aha-xt660r-x-z

Macca2801 16-03-15 02:03

Quote:

Originally Posted by Pleiades (Post 207724)
I have had the SW-Motech footrests for four years now. Much wider than stock and can be set in two positions, stock height or 15mm lower. Been very impressed - made things a lot more comfortable on long runs, as well as standing and removing the rubbers leaves a good serrated non-slip surface.

https://www.motorradgarage.com.au/fo...aha-xt660r-x-z

x2.. they are awesome!!

In the mud...
http://i317.photobucket.com/albums/m...pszyk2yhrl.jpg

On the weekend in the wet...not muddy though...
http://i317.photobucket.com/albums/m...psbaeliivf.jpg

madruss 27-04-15 12:35

Quote:

Originally Posted by WeaveMcQuilt (Post 207723)
I think my wide steel ones are from a TW200 or a TTR, can't figure out which.

All I had to do was bore out the fixing hole from 8mm to 10mm and they went straight on.

I was about to do the "fabricate my own" deal but a trip to the shop might save me some time in the workshop.
Another reason to search this site for information/ideas as often as possible
:hello2:

madruss 30-04-15 21:25

More peg wideners
 
Had a look at a new off the shelf TTR footpeg, they''re the same size as the current Z but without the setup to bolt the rubber insert on top. :sign12:
So still going down the fabrication line. Built two sets of enlarger wrap arounds from stainless sheet, fitted one set to the DR650 yesterday. Not as pretty as I'd hoped but that was the practice run .:eusa_doh: The Z job will be more refined :icon_lol:


All times are GMT +1. The time now is 07:35.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.