.: XT660.com - The #1 XT660 Resource :.

Page 2 of 2

Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� General Discussions ( https://www.xt660.com/forumdisplay.php?f=129)

- - Tenere centre stand ( https://www.xt660.com/showthread.php?t=22850)

dazb40

27-10-14 13:13

Quote:

Originally Posted by Richlybow (Post 203491)

Hi, bought mine new in June and had it lowered...forget the centre stand...mine came with one fitted and after lowering it was virtually impossible to use. There are posters on here who will suggest it's all about technique, which is ******** I'm afraid..unless you're Geoff Capes it's simply unusable. Don't be afraid of cutting the side stand down.. I did mine with a hacksaw and took it to the local blacksmith who welded it for a tenner.....it's a very simple job. You should get it done ASAP before you're bike falls over.

Do you cut the stand at the foot? and how much needs to come off? I have the 25mm lowering kit. thanks

Arjen

27-10-14 16:04

I just fitted the center stand from a Tenere with ABS which is lower.

dazb40

27-10-14 16:53

Quote:

Originally Posted by Arjen (Post 203715)

I just fitted the center stand from a Tenere with ABS which is lower.

Thanks ill look into that!

Arjen

27-10-14 17:28

I lowered mine with 3,5 cm. I had to weld some 4mm plates on both lower ends of the ABS-version main stand so the rear wheel wouldn't touch the ground when on the main stand.

mentira

15-10-15 10:11

Quote:

Originally Posted by kinioo (Post 202513)

Hi there,

FYI, I may have for sale a set of lowering bones complete with side stand already cut and welded ready to install ??

I may also have for sale a centre stand in good nick if you fancy ??

All depends if I get home over the weekend to pick it up ??

If you are interested I will PM you after the weekend once I got them ready for sale.

Chris

Greetings
Just wondered if the side stand was still available? I've done a 20mm lower both ends too. The mainstand I fitted is a bit of a heave now but just manageable (without luggage fitted) The lowered side stand would help if available.
Regards
Mentira

All times are GMT +1. The time now is 05:39.

Page 2 of 2

Show 40 post(s) from this thread on one page