.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z T�n�r� General Discussions ( https://www.xt660.com/forumdisplay.php?f=129)
-   -   buzzing ( https://www.xt660.com/showthread.php?t=22732)

gaulty 28-07-14 22:41

buzzing
 
anyone get a buzz around 3k revs...

Richlybow 29-07-14 08:16

Quote:

Originally Posted by gaulty (Post 201804)
anyone get a buzz around 3k revs...


Can be a bit buzzy between 3 & 4 k rpm. Worst bit is the vibrating plastic around the headlight bulb. Some packing in there seems to have improved it. Bikes only done 600 miles so hopefully will settle down. What's your problem?

gaulty 29-07-14 08:53

that could be it...not an engine noise ,but i nearly killed myself pressing bits of the body work while zipping along....i think folk think i was patting my bike like a dog

bikemad195 29-07-14 16:16

Quote:

Originally Posted by gaulty (Post 201817)
that could be it...not an engine noise ,but i nearly killed myself pressing bits of the body work while zipping along....i think folk think i was patting my bike like a dog

My xt660x gets a slight buz between 3 and 5 k and its the fold down flap on the fuel filler cap

street_moto 29-07-14 17:11

Earplugs!

Used to ride an R1100GS and a Guzzi before the Tenere, the odd sounds that used to come from different parts of engine, gearbox and other places would drive you insane if you started worrying, both were perfect!

Huter 29-07-14 22:49

I have the same problem and have done the "pat the bike all over while riding thing" and i can not work out exactly where it is coming from mine is very intermitant though and does not happen on every ride. I think it is coming from the fork guards?

66T 30-07-14 04:35

Plastic ignition switch cover vibrates against the tank on mine.

marques 30-07-14 05:47

The tenere side exhaust cover has a bolt that hits the exhaust. Before I found that thread I took my crankcase cover of, looking for the perpetrator.

redbikejohn 30-07-14 09:28

I had a noise coming from the front of the bike which got really annoying. One Saturday I traced it to the headlight. Its mounted on rubbers and these rubbers had gotten old and shrunk so the headlight was rattling slightly, enough to cause a buzz. I fitted a washers on each rubber to take up the slack and all sorted. Previously I found the screen was touching the headlight surround so I spaced the screen with some little plastic top hat screen washers I had left over from my probolt gsxr days.

66T 30-07-14 10:40

Quote:

Originally Posted by marques (Post 201844)
The tenere side exhaust cover has a bolt that hits the exhaust. Before I found that thread I took my crankcase cover of, looking for the perpetrator.

He he, me too. Shortened bolt, and all better.


All times are GMT +1. The time now is 06:15.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.