.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Stainless pad pins ( https://www.xt660.com/showthread.php?t=22056)

tripletom 13-02-14 20:49

Stainless pad pins
 
Hullo all.
Just refurbished the front calipers on my Ten after an MoT failure. Whilst I was there I took a chance on ordering a pair of these stainless pins as I've never been that happy with the OE ones. They always rust up and catch the pads, and I've always had to drill the holes in the pads out to allow them to slide.
Anyway, for a tenner I thought they were a bloody good item.
Pip pip

sweller 13-02-14 21:56

Where did you get them from and how much were they?

Geldof 13-02-14 22:11

Yeah I noticed the pins rust very badly on this bike too. Interested to know also where
you got the stainless ones

bikemad195 13-02-14 22:14

Quote:

Originally Posted by Geldof (Post 197107)
Yeah I noticed the pins rust very badly on this bike too. Interested to know also where
you got the stainless ones

+1 im about to rebuild and derust mine when I swap back to my summer wheels

steveD 13-02-14 22:38

The pins are on ebay, look at Toms thread, they are here:-

http://www.ebay.co.uk/itm/2514260615...84.m1439.l2649

:047:

tripletom 13-02-14 23:23

Sorry, it's the crappy text colour. link is here- http://www.ebay.co.uk/itm/2514260615...84.m1439.l2649

Or you can click on where I wrote 'these stainless pins' in the OP.

I'd also say that the R-clips that come with the pins are just BZP so keep your OE ones as they're stainless and use them.

Geldof 14-02-14 01:22

Thx chaps.... I've just invested

sweller 15-02-14 07:52

Quote:

Originally Posted by tripletom (Post 197113)
Sorry, it's the crappy text colour. link is here- http://www.ebay.co.uk/itm/2514260615...84.m1439.l2649

Or you can click on where I wrote 'these stainless pins' in the OP.

Blimey, you're right about the text colour! It doesn't really highlight them. At. All.

Perhaps manually putting in an underlined link would help in future?

sweller 16-02-14 11:12

The pin for the rear calliper is different, any stainless equivalents?

Sent from my Nexus 7 using Tapatalk

tripletom 17-02-14 20:03

I don't know but the Brembo caliper is used on KTMs too.


All times are GMT +1. The time now is 09:44.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.