|
Longer clutch cable
A few have asked about longer clutch cables when
useing bar risers... the Yamaha cable only just makes it & can be a bit tight on full lock.. With the new USD conversion I needed a longer cable.. So I went looking.... Found this Cable CBL9 is 75mm longer.. http://www.pyramidparts.co.nz/pages/cables Click the flag at the top for the site in your country... |
Excellent find!! Cheaper than getting a custom made cable from Venhill. At that price I will get myself a spare for my trips
|
How did you guys get on with the cable? Is the quality OK?
Anyone else bought one more recently able to confirm that CBL9 fits straight on? |
Doesn't fit
Arse. Bought one in the UK and it's no good. It is indeed longer, but the threaded section is too short and it's not possible to fit it without the clutch being permanently engaged. Lubed it up too so there's no sending it back. I'll just use it to whip the neighbourhood kids.
|
Quote:
You are right... I had to move the lower mount 10mm closer to the clutch oparating arm... the fee cable is about 10mm shorter.. the cable has stretched now.. could prob go back to the standard postion now.. Other than that mod ...they work a treat... |
Quote:
Any issues with any other cables if raising bars???? |
they work ok... but yer need to move the lower cable mount 10mm
closer to the arm... I now have the standard cable on with ROX anti vib riser which are 100mm higher... just don't put the cable though the forks..bring it up on the tank side of the handle bars... it works without a prob.. |
Quote:
|
throttle cables do fit... but only JUST... really need to be a bit longer...
making a new set is on the ever growing To Do list.. |
Quote:
well done on the find Rob |
| All times are GMT +1. The time now is 03:54. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.