![]() |
XTR suspension replacement...
Finally got the forks back... They have been re-valved , sprung for the
170kg XTR , shortened & travel re-duced to 240mm..couldn't see alot of point having 300mm of fork travel on a bike with 250mm of ground clearance.. The little CR250 disc had to be replaced as I couldn't see it stoping the XTR in a hurry if needed. So went for a 320mm SM unit.. All I still need is a steering damper. trying to find one I can use with the ROX anti vibe risers.. And a head light for the rally raid screen.. May aswell replace the swing arm & linkage bearings/seals while I have it apart.. http://i1244.photobucket.com/albums/...1/SAM_0017.jpg |
Mnnnn nice collection, I have 3 of those 320mm rotors sitting in my workshop.
|
The new front end is finaly in... made it a diffrent bike..
I think the springing is a bit on the hard side yet... but i will spend some time playing with the compression & rebound damping first.... Still got to put the Ohlins in the rear... just waiting on swing arm & linkage bearings so I can do the lot at once... I have another front wheel I'm thinking of having a 18" rim spoked into... A road wheel for seal/gravel.. http://imageshack.us/a/img543/7785/exn3.jpg |
Wow - some nice mods there - keep us informed :cool:
|
All times are GMT +1. The time now is 22:47. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.