.: XT660.com - The #1 XT660 Resource :. - KLX650 fork swap to XT660, with pics. easy job!

Page 3 of 3

Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- Suspensions & Steering ( https://www.xt660.com/forumdisplay.php?f=50)

- - KLX650 fork swap to XT660, with pics. easy job! ( https://www.xt660.com/showthread.php?t=20845)

Landton

22-04-17 08:56

You have to grind a line on the screws and use a screwdriver, it worked for me. Some People just drill them off.

Skickat fr�n min F5321 via Tapatalk

daibosatsu

22-04-17 17:42

Quote:

Originally Posted by Landton (Post 229404)

You have to grind a line on the screws and use a screwdriver, it worked for me. Some People just drill them off.

Skickat fr�n min F5321 via Tapatalk

Thanks, in the end I had to drill them off. Another question is the axle is bigger than the hole in onr leg as in this topic said, and I,m afraid that drilling it out could make the center missmatch. Do you think rethreading the axle is a good idea?

Btw, are you from Sweden? :D

Landton

22-04-17 20:15

Don, t know about the KLX stem, I have only used KTM triple clamps and the XT660 stem fits very good in the bottom KTM triple clamp.

That.,s correct :)

Skickat fr�n min F5321 via Tapatalk

daibosatsu

25-04-17 16:53

Quote:

Originally Posted by Landton (Post 229418)

Don, t know about the KLX stem, I have only used KTM triple clamps and the XT660 stem fits very good in the bottom KTM triple clamp.

That.,s correct :)

Skickat fr�n min F5321 via Tapatalk

So... It's done
https://scontent.fsgn2-2.fna.fbcdn.n...08&oe=59981821
https://scontent.fsgn2-2.fna.fbcdn.n...a3&oe=5977A167
https://scontent.fsgn2-2.fna.fbcdn.n...ce&oe=598081D0

All times are GMT +1. The time now is 22:38.

Page 3 of 3

Show 40 post(s) from this thread on one page