.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   Center stand....? ( https://www.xt660.com/showthread.php?t=20789)

Chris1811 21-05-13 22:44

Center stand....?
 
How much and where from?

Has anyone had any experience of this one?.....seems rather cheap?


http://heavyduties.ro/yamaha/xt660z/xt660ztenere.html

Pleiades 21-05-13 23:20

Quote:

Originally Posted by Chris1811 (Post 187926)
Has anyone had any experience of this one?.....seems rather cheap?

http://heavyduties.ro/yamaha/xt660z/xt660ztenere.html

Looks to have VERY small feet on it - you wouldn't want to use it on anything even slightly soft, even warm tarmac!

Nowt wrong with the Yamaha item - strong and reasonably priced.

steveD 21-05-13 23:27

Not as good as the original Yamaha one. Only one spring and as has been mentioned small feet. Probably OK for the road but not for off road.

Just my opinion.:toothy2:

kinioo 21-05-13 23:47

Quote:

Originally Posted by steveD (Post 187928)
Not as good as the original Yamaha one. Only one spring and as has been mentioned small feet. Probably OK for the road but not for off road.

Just my opinion.:toothy2:

For the off road you dont need it anyway...

Just my opinion :)

maxwell123455 22-05-13 07:59

I think it's worth it if postage isn't too much. if you really want it to have wider feet someone with a welder I'm sure would weld wider feet on at a small cost.

Ohlins 22-05-13 10:51

Have a look here for a close up of the stand....

http://www.xt660.com/showthread.php?t=20788


:)



.

Chris1811 22-05-13 12:45

Im after one as my next mod simply because when I came back from the lakes I got an unlucky puncture. Had I have not been traveling with scottnet I would have struggled to change the tyre at the side of a road. There was no were suitable to lay the bike on its side and it was lucky that we found a big enough rock to pop the bike on and get the rear wheel off the floor.

I dont have a suitable top box to prop it up on as I dont trust the yam one as its dead flimsy and bends when you look at it haha.


All times are GMT +1. The time now is 15:38.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.