![]() |
Axle tool
Years ago I bought a special tool to suit the FJR1300 I had as the same as the XT no tools are supplied to remove wheels in the kit.
I couldn't find one for my XT660Z so I thought I'd make my own. So bought a 22mm combination spanner, Cut off the open end and welded on a 14mm bolt. So 22mm ring for the back axle and 14mm bolt head for the front axle. |
Quote:
It's not perfect but it works. Just take a 14mm bolt and turn a 14mm nut into it until it locks tight. If the flat surfaces don't line up perfectly, play around with a thin washer. I used it before I cut off a 14mm hex head for the tool kit. |
All times are GMT +1. The time now is 15:55. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.