.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660Z T�n�r� General Discussions ( https://www.xt660.com/forumdisplay.php?f=129)

- - generator output ( https://www.xt660.com/showthread.php?t=19121)

generator output

I want to fit heated grips and poss a sat nav to my Tenere ,will the generator run everything no probs ???

hi Spen, no problems at all! mine have been happily working from the power supply behind the dash panel since i got the bike. add a fuse to the circuit tho! just in case

bernard

:smilies0349: cheers

Quote:

Originally Posted by stoic bloke (Post 173796)

hi Spen, no problems at all! mine have been happily working from the power supply behind the dash panel since i got the bike. add a fuse to the circuit tho! just in case

bernard

thats not what my legs said after i had to push you up that grass bank to then push you down it again to jump start it.

only joking the output is big enough ive ran an XTR which i think has a lower output with heated grips, sat nav, and some extra lights (2*35w) for quiet a few winter rides and never had any issues.

Looking to find a live from the ignition behind the plastic cover of the dash ,i guess the side lights would do ? :glasses7:

Quote:

Originally Posted by stoic bloke (Post 173796)

hi Spen, no problems at all! mine have been happily working from the power supply behind the dash panel since i got the bike. add a fuse to the circuit tho! just in case

bernard

I assume the connector in there has 2 wires are they color coded black and red? otherwise how will i know the live ? or does the connector just have a single live .

Hey Spen. There's planty of power for most of the additional items you may need to have. I use the power supply behind the console which is the supply with the terminal that nobody appears to find the female part of!. I just cut off the end and use my own connector to power the GPS, because this is a switched supply.
I have a powered relay which is triggered by the tail light circuit. This in turn powers a set of cheap fuses which power my heated grips, a cigarette socket, a lead for my heated jacket and a Gammatronix LED which shows the power coming out of the battery. I have ridden during the winter and have not had a problem with charging at all.
The idea of the small LED is to show me if the battery is struggling which on occasion has done as it will glow Orange, usually when I've got my heated jacket turned on and I've been at traffic lights, ticking over. A quick rev and she'll turn Green again or I just switch off the heated grips for a while until I get going again.

Hope this helps

Counterpart of the terminal behind the dash

Quote:

Originally Posted by steveD (Post 173825)

Some german guy found the counterpart of the terminal behind the dash:).

You can purchase it at:
X-MAS Motorcycle Electrics
Kleine Pfarrgasse 8
1020 Vienna, Austria

LINK: http://www.xmas1.at

Steckergeh�use (the case)
Art.-Nr.: V-19590
description: Vielfachstecker 2.3
Additional info: Flachsteckergeh�use 2 polig
Referenz-Nr.: 0001-20-0010-30
unit: 1 piece
price per unit: 1,70 Euro

Steckerkontakte (contact pins)
Art.-Nr.: V-19587
description: Vielfachstecker 2.3
Additional info: Flachstecker 2,3mm 0,5-1,25mm�
Referenz-Nr.: 0010-20-0100-30
Unit: 10 pieces
price per unit: 2,50 Euro

Quote:

Originally Posted by steveD (Post 173825)

Thanks ,but again is the power supply two wires (if so which is which) or just a single live feed ?? i also use the LED indicator for the generator , works fine when the bikes running but i have found it goes red when the bike is sitting not running ! i wonder is my battery on it"s way out !!

Quote:

Originally Posted by spen (Post 173827)

The terminal behind the dash is a 2-wire terminal. Black is ground, brown is + (live I guess).