.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   General Discussions & Off Topic ( https://www.xt660.com/forumdisplay.php?f=5)
-   -   changing clocks from kph to mph ( https://www.xt660.com/showthread.php?t=18430)

stumpydave 28-01-12 22:23

changing clocks from kph to mph
 
I know this is a simple two minute job, but I just cant remember how.

How do you change the clocks from kph to mph?

Austin 28-01-12 23:18

press and hold the top button....I think.

steveD 29-01-12 11:36

Paint little lines on the clock face in different positions.

Hope this helps.:058:

DickyC 29-01-12 14:14

With the ignition off, press and hold both buttons in and keep holding them whilst you turn on the ignition. The display will start flashing and will have changed from MPH or KPH to the opposite, depending on what you were on to start with. I do this a lot for changing from road to off-road navigation as I use kilometres when navigating off road. Also useful in France of course.

Hope that is clear and helps.

Pleiades 29-01-12 17:12

Quote:

Originally Posted by DickyC (Post 167570)
With the ignition off, press and hold both buttons in and keep holding them whilst you turn on the ignition. The display will start flashing and will have changed from MPH or KPH to the opposite, depending on what you were on to start with. I do this a lot for changing from road to off-road navigation as I use kilometres when navigating off road. Also useful in France of course.

Hope that is clear and helps.

I think the above only applies to the XTZ. For X/R models I believe you press and hold the select button for at least 2 seconds...

stumpydave 29-01-12 19:45

Thankyou Steve, I can always rely on you to help :021:

Thankyou Dickyc, I should have said its an r not a z, as austin and mr pleiades both said it is the top button held for over two seconds, thanks chaps.

DickyC 29-01-12 22:20

Quote:

Originally Posted by stumpydave (Post 167580)
Thankyou Steve, I can always rely on you to help :021:

Thankyou Dickyc, I should have said its an r not a z, as austin and mr pleiades both said it is the top button held for over two seconds, thanks chaps.

Sorry, my mistake. Your avatar is not a Z so should have spotted that.


All times are GMT +1. The time now is 08:26.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.