.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- General & Appearance Mods ( https://www.xt660.com/forumdisplay.php?f=22)

- - Foot pegs ! ( https://www.xt660.com/showthread.php?t=17749)

Hello,

I am lookin for aftermarket foot pegs (standard, rubber seem slippery when wet) wider, something like for motocross bikes but cheaper!
Checked web and dont want to pay L70 for foot pegs.
Is there anything cheaper or something from other bike which will match XT660Z ??

Thanks in advance

Chris

http://www.ebay.co.uk/itm/1996-2005-...item5ae11bcc52

Anything for a YZ80 will fit. I've got some sort of cheap chinese ones that are probably the same as the ones I've linked. I had to drill a 5mm hole in one of them for the spring (it had one, but not in the right place), other than that, they go straight on fine. Mine have been on for a good 15,000 miles I think.

Top man!!

Many thanks, this is what I am after!!
L15 - job done

Even cheaper, just take the rubber bits off.

Quote:

Originally Posted by uberthumper (Post 162247)

I've got some sort of cheap chinese ones that are probably the same as the ones I've linked. I had to drill a 5mm hole in one of them for the spring (it had one, but not in the right place), other than that, they go straight on fine. Mine have been on for a good 15,000 miles I think.

I have the same (although I moved them to the TTR as it's the same fitting as the Z), bit cheap, rough casting, rust a bit in crap weather, but they work very well.

PivotPegz are nice, but for value the linked pegs are much better, and considerably cheaper.

@Skunkmotot - I tried the rubber off, but just could't get the right feel