.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   XT660Z Mods ( https://www.xt660.com/forumdisplay.php?f=165)
-   -   OTR bashplate problem ( https://www.xt660.com/showthread.php?t=16669)

Kemizz 21-04-11 22:26

thanks guys (and girl :) )

I spoke to Jochen from OTR , he said my model is the newest one with higher side wings and confirmed it is very strong and I don't have to worry about getting something damaged ...


I also asked him if he didn't find it strange that mine was so close to the waterpump and other engine side , but he didn't clearly answer on that , only thing he said that they are sure it will protect everything fine ...

so I just leave it like it is ..., maybe I can bend it a little bit , gonna check that later

Jenny , to come back to the tubes your are talking about ,

left 32mm and a 8 mm one , right is a 40mm , so this would only mean 2 mm difference,

I've tried both ways, left or right and the other way around, same result ...

aahh anyway , I'm just going to ride the damn thing :)

One big difference I've notice is the noise that bashplate produces ....

I mean it's not the plate itself , but is the sound of the engine that you hear but then metal acoustics :) the alumimium has a certain , gong in it ... hmm bad explanation here ...


All times are GMT +1. The time now is 08:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.