Raptor 700 PCIII on XT660 2007 ????
 

Hi,
Dose anyone know if a Raptor 700 PCIII with LCD100 will work on a 2007 XT660,
Many Thanks

Welcome !!!!! kev will correct me if I'm wrong..but I believe (am sure) it is the same as a rappy 700. kev has a digi box on his pc111, it could be one of those..........

If you want to buy one at dirt cheap price call Simon Cope 01253 891087,(Dynojet Approved Dealer), plus he would know for sure if it is the same connection.

Anyway, what's the plan?? just a pc111, or some zorsts too?

A DNA Stage 3 airbox at around �400 is the way to go! (about the same price as exhausts, but a hell of alot more poke for your money!)

check these links out...

http://www.xt660.com/showthread.php?t=4509

and... http://www.xt660.com/site/node/310

The other duplicate post has been deleted. :Christo_pull_hair: :rtfm::013::poke1:

I don't see why not, the Raptor PCIII should fit, but do not know of anyone who has fitted one.

The LCD100 will work on any PCIII, I have one on my XTX with my PCIII

Some people have fitted the rappy 700 PC1V on their XT's.....I should think that the price difference between a PC1V and a PC111 is only about �20 now....again call Simon for the best advice

I have the raptor PCIII fitted to my XTR no problem

The PCV that was fitted to mac-cos' XTZ (and is now sat on the side in my kitchen) says Raptor 09-10 on the box. Don't know if that helps with an 07 R/X though.

So we what we know.

A PCV for a Raptor 700 2009 to 2011 will fit all models XTX, XTR & XTZ 2007 to present.
A PCIII for a XTX/R will fit all models including a XTZ 2008 to 2013 & XTX, XTR 2004 to present.

hey Rooster....did you get a LCD 100?

.........if you did, i would like to borrow it for a very short while....if that is OK with you.?
oh...and we need to have a HUMM meeting at some stage too!

You will need to update your PCIII firmware to the latest spec for the LCD100 to work.