PowerCommander III or V
 

Neighbour has a PC V up for grabs. Its free so would be nice :-)

My wife purchased me a DNA filter and breather which I can't use currently...

Can the PC V be fitted to a 09Ten? Or do I need a PC III

If not why?

Apart from being the V being smaller and minus the 9v connection are there any major differences.

TIA.

A PCV can be used on a XTZ, most of the guys are using the Raptor 700 PCV.

Off The Road also sell a PCV version for the XTZ, what model PCV does your mate have?

PCV has a 15% tune zone the PCIII does not. With my type of traffic riding I am sitting around 15% throttle so the PCV would be better for tuning than a PCIII.

The PC V has come off a YZF R1 09.

I'm assuming the connectors are specific to the Make and or Model hence the Raptor 700 PC V being used as the XT and Raptor share a few components..?

Are Off The Road fitting Yamaha/XT specific connectors?

Obviously don't want to use the DNA filter and breather as is in case it runs lean.

Bike will stay with standard exhausts intially although I might cut the CAT out at some point...

Also will fit a new chain and sprockets on the weekend which will drop the rear to 44 (so 15/44) as I ride a lot on A's and M's and want the revs a little lower.

The R1 PCV will not fit a XT660, sell it & buy a Raptor or Off The Roads PCV.