![]() |
checking Oil level
When checking the level, I have been following the handbook instructions to the letter.
My understanding is that since the engine uses dry sump, if the check is left too long, the oil will drain from the upper reservoir and I guess the stick will show either low or no level. Now while doing my recent regular check, I forgot the oil and check it after few hours & found the level on the stick to be normal:icon_surprised: So after another run, and an overnight wait, I checked the level and it was halfway between the 2 markers. So why is the oil not draining after such a long time. Is this normal:confused2: |
You have to make sure the bike is fully warmed then leave to rest for 5-10mins, also make sure to hold the bike level and give it a second for the oil to move from being on the side stand.
|
My details don't show the bike! is it an XTR 2009.
Agree with your comments & this is what I do. Now what happens to the oil level if you leave you bike overnight with the engine cold? |
Quote:
|
All times are GMT +1. The time now is 03:45. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.