.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- XT660X & XT660R General Discussions ( https://www.xt660.com/forumdisplay.php?f=121)

- - head stock bearings ( https://www.xt660.com/showthread.php?t=12239)

bigian

17-11-09 10:41

head stock bearings

I am in the process of fitting some uprated wr450 forks to my xt660r. I need to source some head stock bearings. Does anyone know the outside diametre of both the top and bottom head stock bearings on the xt660r. I am too lazy to strip down to measure. If someone has this info it will make my life easy. Or the No.off the bearings or the oficial yam part No. My local Yam dealer are lessthan helpfull. They dont have any and wont get any without payment first and all i want to do is measure them. Thanks

johnno

17-11-09 16:52

Quote:

Originally Posted by bigian (Post 111851)

I am in the process of fitting some uprated wr450 forks to my xt660r. I need to source some head stock bearings. Does anyone know the outside diametre of both the top and bottom head stock bearings on the xt660r. I am too lazy to strip down to measure. If someone has this info it will make my life easy. Or the No.off the bearings or the oficial yam part No. My local Yam dealer are lessthan helpfull. They dont have any and wont get any without payment first and all i want to do is measure them. Thanks

32005JR ,32006JR very cheap (�9/15 pair) from any bearing supplier,very dear (�28/55 pair)from any m/c dealer

Kev	17-11-09 22:28

Have you read your other post.

http://www.xt660.com/showthread.php?p=111823#post111823

bigian

24-11-09 02:09

Thanks for the info.

Piipz

08-07-10 10:54

Hi! Which one of those is lower bearing
32005JR - 25x47x15mm
or
32006JR - 30x55x17mm

Both bearings are available as sealed model, but i only need lower as sealed.
Sealed models have different product codes also:
32005JRRS and 32006JRRS

Kev	08-07-10 11:26

I would say the bigger bearing is the lower one.

Piipz

08-07-10 11:56

Thanks :)

:(
the lower sealed bearing is out of stock in here :( They only have non-sealed version, the 32006JR :((

I will still have to pay twice the price from m/c shop :(

The original lower seal could be used but im not sure i can get it off the bike intact... What would you recommend?

Kev	08-07-10 12:10

A New bearing with a new seal.

All times are GMT +1. The time now is 03:46.