.: XT660.com - The #1 XT660 Resource :.

Page 1 of 2

Show 40 post(s) from this thread on one page

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)

- General & Appearance Mods ( https://www.xt660.com/forumdisplay.php?f=22)

- - Handguards for XTZ ( https://www.xt660.com/showthread.php?t=12232)

Merch

16-11-09 14:44

Handguards for XTZ

Sorry if this has been covered elsewhere, but I have looked and can only find for the xtx,
Can any one advise me on the best for the Tenere, and where to buy from, with the cold weather coming i feel its time to invest in my first MOD.
Thanks

uncle ricky

16-11-09 15:07

Have a look here

http://www.xt660.com/search.php?searchid=248616

JMo	16-11-09 16:38

Or to save you the trawl... get the KTM plastic wrap around ones (they same as you get on a 990A) - they are under �40, fit on with little or no modification (depending on the position you like your levers) and they will fit with the o/e bar end weights if that is your want...

I'd say there is nothing better for the money... especially as they offer pretty decent weather protection too.

xxx

Merch

16-11-09 16:39

Thanks Uncle Ricky.........I must learn my way around a bit better and look in the right place!!!

Merch

16-11-09 16:40

Thanks JMO, thats exactley waht I need, is there a recommended place to buy? And Good luck with your ride!

uncle ricky

16-11-09 17:34

Quote:

Originally Posted by Merch (Post 111773)

Thanks JMO, thats exactley waht I need, is there a recommended place to buy? And Good luck with your ride!

Could try here :typing[1]: :Pyshic_C5UYG8:

http://www.dirtbikebook.com/acatalog...andguards.html

DickyC

16-11-09 19:43

Quote:

Originally Posted by JMo (Post 111770)

Bit cheaper here at �39

http://www.triumph-online.co.uk/tige...ers-2908-p.asp

Have used this place before for parts with no issue.

uncle ricky

16-11-09 20:39

Quote:

Originally Posted by DickyC (Post 111801)

Bit cheaper here at �39

http://www.triumph-online.co.uk/tige...ers-2908-p.asp

Have used this place before for parts with no issue.

Good find,:blob6: that is over 4 quid cheaper inc the postage:blob6:

steveD

17-11-09 00:00

I agree with JMo, KTM are cheap and fit well , look good and give very good weather protection. If you are going to ride in wet weather check out Tucano handlebar muffs, I use them on mine and use summer gloves all year around!
I had to cut the wind deflector parts off the KTM handguards and just use them to support the Muffs. I have a good pair of handguards for the summer.:047:

Gory74

17-11-09 00:02

Barkbusters

Dirt Bike Bitz on 0845 643 4222 will supply barkbusters for the Tenere for around �86, i can't remember the exact figure though. I recieved them in about 2 days even with the postal strikes! I did mod the way they mounted them though as they give you an expanding insert for the end of the handle bar. I cut my original weights down to about 25mm and tapped a thread into them. I then had to extend the thread on the supplied bolt (with a die) as it's shank wasn't completely tapped.

I'm quiet happy with em and i don't have any weights hanging out the end looking ugly! :laughing11:

Gory

All times are GMT +1. The time now is 01:06.

Page 1 of 2

Show 40 post(s) from this thread on one page