.: XT660.com - The #1 XT660 Resource :.

.: XT660.com - The #1 XT660 Resource :. ( https://www.xt660.com/index.php)
-   Fuelling and Intake ( https://www.xt660.com/forumdisplay.php?f=207)
-   -   removal of snorkel ( https://www.xt660.com/showthread.php?t=11088)

pommie 23-07-09 16:04

removal of snorkel
 
just wondering what this air filter snorkel looks like? can someone post a picture so i can see if mine is fitted or i might need to get rid of it

alex

Worry Brother 23-07-09 16:22

take your seat off and you'll see what looks like a minature ships funnel in the middle, just on the right side of the battery.

If its missing then there will be a hole approx 3-4 inches wide x 6 inches long approx.

Cheers

WB

drb277 24-07-09 01:45

Snorkel
 
Took me a while to figure what the Snorkel was too.:retard: Basically its the air intake for the airbox. Its there staring at you under the seat. :happy11:

CaptMoto 24-07-09 02:46

Quote:

Originally Posted by drb277 (Post 101124)
Took me a while to figure what the Snorkel was too.:retard: Basically its the air intake for the airbox. Its there staring at you under the seat. :happy11:

http://i144.photobucket.com/albums/r...60/snorkel.jpg

pommie 27-07-09 14:56

cheers captmoto...that pipe has been removed from previous owner when power commander 3 was fittted

alex

Powerfreak 12-08-09 00:57

should the snorkel be removed completly or cut down so you still have the lip to stop anything falling into the air box?
Ive completly removed the snorkel but am worried due to a build up of water in the small plastic tube under air box.I have put a few slices in this tube with a knife to stop any water reaching the engine (not sure if a good idea) but im still worried about any dirt etc etc reaching the engine with the whole snorkel removed.
any advice is welcomed.
cheers big ears.:o

CaptMoto 12-08-09 03:25

Just pull it out and do what I did to mine, I've cut a piece of wire mesh and stucked it on the top of the hole with silicon so that nothing could fall in the airbox.

Kev 12-08-09 07:23

Quote:

Originally Posted by Powerfreak (Post 102683)
should the snorkel be removed completly or cut down so you still have the lip to stop anything falling into the air box?
Ive completly removed the snorkel but am worried due to a build up of water in the small plastic tube under air box.I have put a few slices in this tube with a knife to stop any water reaching the engine (not sure if a good idea) but im still worried about any dirt etc etc reaching the engine with the whole snorkel removed.
any advice is welcomed.
cheers big ears.:o

No need to worry, the air box is made up of a few chambers.

The first chamber is where the snorkel sits & can be removed, if any water enters through this opening it will fall to a second chamber which is the lowest point of the air box, on the outside of the air box on the left side of the bike there is a clear plastic hose, get a razor blade & cut 2 slits along the hose this will allow any water that has entered the air box to drain out.

The air filter is in the 3rd chamber & should stay dry. I would always recommend one to fit a oil based air filter over a paper one when removing the snorkel, the oil based filter like K&N or DNA do help repel any drops of water that make splash onto the air filter.

I have had my snorkel removed since 2005 with both stage 1 & 2 filters & have never had any problems riding in thunder storms or washing my bike.

450X 28-08-09 14:45

Snorkel removal
 
What is the pupose of the remival of snorkel, does it give more power etc?

CaptMoto 28-08-09 15:36

Quote:

Originally Posted by 450X (Post 104162)
What is the pupose of the remival of snorkel, does it give more power etc?

In a way yes, it allows more air intake in to the airbox and more air is what these bikes need to generate more power. hence the various stages of filters stage 1, 2 and possibly 3 which is soon to be issued by DNA


All times are GMT +1. The time now is 21:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.